Latitude for SG6000?

[KRLOS]

the other part shuld be a good set up of the lnbf, Circular have to be 11250 standard and lineal have to be 10750, but idont know how the DP34 work.

[ivtec]

Originally Posted by KRLOS

the other part shuld be a good set up of the lnbf, Circular have to be 11250 standard and lineal have to be 10750, but idont know how the DP34 work.

Hi KRLOS,Thanks With the great help from you and lots of sweat and patience i was successful on 61.5 i got it locked,.

next step i need help again i tried to go to 110 but no signal it's night and i'm so tiard that I'll check the dish tomorrow,i already put a switch so i can run circular and linear,but i don't know if i have to configure for the switch and what LNB freq should i use on AMC4101W linear sat,also 110 and 119 are also 11250,

and do i need to set the limits on the motor and how,it seems it stops and some times don't go,on the manual it states the when it don't want move it's because software limits can you please explain. i hope you guys are patient with me it's my first time i get myself on an adventure like this, i just like to learn things just for the fun of it. i only have 4 years in the primer school and it's hard to understand this stuff special if it's another languish. if is there anythingelse that you guys figure that i need to get more sat's special AMC4 RTPI, thanks in advance.

[ivtec]

Originally Posted by KRLOS

the other part shuld be a good set up of the lnbf, Circular have to be 11250 standard and lineal have to be 10750, but idont know how the DP34 work.

I don't have a Dp on this one i got from galaxy.com with dish and motor a 4 way Disec switch that i already installed after i locket on 61.5,is that why i can't lock on 101w and 110w? it's night i think the dish goes there but no signal and quality. any help is appreciated.

[ivtec]

Originally Posted by ivtec

I don't have a Dp on this one i got from galaxy.com with dish and motor a 4 way Disec switch that i already installed after i locket on 61.5,is that why i can't lock on 101w and 110w? it's night i think the dish goes there but no signal and quality. any help is appreciated.

KRLS i was so happy that i had hit 61.5 and now after attempting to hit 110w and 101w without success i lost 61.5 to although motor moves to either 110 and 101 but it says weeks signal moving to 61.5. i did not go up there yet hope mount is not out of plumb or the switch threw off the whole parameters.anything you guys think of it?thanks,

[ivtec]

Originally Posted by ivtec

KRLS i was so happy that i had hit 61.5 and now after attempting to hit 110w and 101w without success i lost 61.5 to although motor moves to either 110 and 101 but it says weeks signal moving to 61.5. i did not go up there yet hope mount is not out of plumb or the switch threw off the whole parameters.anything you guys think of it?thanks,

KRLS my friend good news i got the 61.5 back,it was the Switch i took it out and voila everything is find,i did not sleep all night thinking after all the work i put securing and plumbing the Mount thought that it caved on me but thank god everything is find,keep your fingers crossed. I also took out the connection for Circular since i don't need it for now and go for AMC$ that's the one i'm more interested on RTPI freq 12033/3003,hope i have good luck.
I'll post more as i go on,thanks allot for your help and patience .

[ivtec]

Originally Posted by ivtec

KRLS my friend good news i got the 61.5 back,it was the Switch i took it out and voila everything is find,i did not sleep all night thinking after all the work i put securing and plumbing the Mount thought that it caved on me but thank god everything is find,keep your fingers crossed. I also took out the connection for Circular since i don't need it for now and go for AMC$ that's the one i'm more interested on RTPI freq 12033/3003,hope i have good luck.
I'll post more as i go on,thanks allot for your help and patience .

Ok bro i Got Amc4 101W good pic but i can't get sound on any of the free chan any clue Thanks KLOS

[ivtec]

Guys Everything is find now, it was audio cables disconnected and conf. Lang button on the remote, Thank you all for trying so hard to help me i apreciate it great site.

[KRLOS]

Originally Posted by ivtec

Guys Everything is find now, it was audio cables disconnected and conf. Lang button on the remote, Thank you all for trying so hard to help me i apreciate it great site.

I'm glad to hear that!