switch install help

[ivtec]

Hi guys,i successfully installed my motorized system just for true FTA and installed a invacom quad QPH-031 LNB i'm using linear only,i have a Diseqc Switch 4x1 WS4120HD,950-2400 MGHZ,i would like to get Discovery HD Theater off 110W since is open,but i think this is a circular sat, please someone give me a schematic how i go about connecting the circular in conjunction with the linear already installed.and what con fig should i do in the HDNFusion,thanks in advance and Merry Christmas to you all.

[RDosetareh]

Here is a wiring diagram.... http://www.galaxy-marketing.com/images/ku_ban9.jpg

As far as setting it up in your receiver, you just have to set the proper port on the switch. If your circular feed is in the "1" port, then in your receiver, you will need to set the receiver for that particular satellite to "Port A" or "Port 1", if using "2" port, then you would set it in the receiver under "Port B" or "Port 2", etc....

[ivtec]

Originally Posted by RDosetareh

Here is a wiring diagram.... http://www.galaxy-marketing.com/images/ku_ban9.jpg

As far as setting it up in your receiver, you just have to set the proper port on the switch. If your circular feed is in the "1" port, then in your receiver, you will need to set the receiver for that particular satellite to "Port A" or "Port 1", if using "2" port, then you would set it in the receiver under "Port B" or "Port 2", etc....

Hi RDosetareh,sorry to bring this up about the SW,i hadn't a chance to go up in the roof again yet due to Snow and rain here in New England but as soon it get good which i doubt any soon in this winter, i'll go up in the high dangerous roof to put the SW back,but i still don't see any ports A or B in my HDNFUSION set up that i can set up unless that will show upon installing the Switch,please assure me that's the case,because I'd hate to put the SW back and than take it out due the receiver not accepting it.thanks and have a happy holidays.

[RDosetareh]

I really would not be able to tell you about the NFusion receiver because we have never sold this brand so I'm not familiar with the wordings on the receiver. Eventhough they should be standard, when hack receivers and hack softwares entered the market, lots of the standard verbages were not used. You may need to contact the NFusion dealer or distributor that you purchased the STB from. They would be able to help you much better since it's one of their receivers.