![]() |
|
#1
|
||||
|
||||
|
I set up a Bsc-621-2 on my birdview dish and the polarity on the sat is opposite of what they should be can I rotate the bsc to get the proper readings.
__________________
Rainman's Equipment Undien 4600,DSR 922 Fortec Ultra, Satworks 3618 2 Fortec Mercury II Fortec Classic NA 8.5' Orbitron polar C Ku dish 8.5' Birdview HH C Ku dish 100cm Fortec dish 90cm Fortec dish 2 DG-240 HH motors Co Rotor II feed horn Norsat 8515 C band lnb Norsat 4506A Ku lnb BSC-621-2 Lnbf Invacom QPH-031 Lnbf Invacom SNH-031 Lnbf Fortec Fsku-v universal Lnbf V-Box |
|
#2
|
|||
|
|||
|
Yeah, if you turn it about 90 degrees, it should work OK, but if it is off in reality, by turning it 90 degrees, it will then put your Ku band off.
You maybe able to open the Ku portion of it and turn the Ku band part to align it with the C band part. |
|
#3
|
||||
|
||||
|
not interested in ku right now just got it locked in on 1 c band sat.
__________________
Rainman's Equipment Undien 4600,DSR 922 Fortec Ultra, Satworks 3618 2 Fortec Mercury II Fortec Classic NA 8.5' Orbitron polar C Ku dish 8.5' Birdview HH C Ku dish 100cm Fortec dish 90cm Fortec dish 2 DG-240 HH motors Co Rotor II feed horn Norsat 8515 C band lnb Norsat 4506A Ku lnb BSC-621-2 Lnbf Invacom QPH-031 Lnbf Invacom SNH-031 Lnbf Fortec Fsku-v universal Lnbf V-Box |
|
#4
|
||||
|
||||
|
Robby what should the proper orientation be for the bsc-621-2?
__________________
Rainman's Equipment Undien 4600,DSR 922 Fortec Ultra, Satworks 3618 2 Fortec Mercury II Fortec Classic NA 8.5' Orbitron polar C Ku dish 8.5' Birdview HH C Ku dish 100cm Fortec dish 90cm Fortec dish 2 DG-240 HH motors Co Rotor II feed horn Norsat 8515 C band lnb Norsat 4506A Ku lnb BSC-621-2 Lnbf Invacom QPH-031 Lnbf Invacom SNH-031 Lnbf Fortec Fsku-v universal Lnbf V-Box |
|
#5
|
|||
|
|||
|
Hi Rainman,
Sorry for the delay in answering. I've been out of town for the past few days and just now am getting back to Atlanta. I'm actually in the airplane right now as I'm typing this.... Yes, Airtran has internet onboard now.. Super fast too. Anyway, back to your question, what exactly do you mean by orientation? Could you explain it a little? Are you talking about the F/D or the polarity? |
|
#6
|
||||
|
||||
|
talking about the polarity. facing the dish using it as a clock does the flat part of the bsc set at the 4 oclock position or is it at the 8 o clock position or just where on the clock face does it suppose to be at hope this is clear if not I will take pictures to show the position of mine.
__________________
Rainman's Equipment Undien 4600,DSR 922 Fortec Ultra, Satworks 3618 2 Fortec Mercury II Fortec Classic NA 8.5' Orbitron polar C Ku dish 8.5' Birdview HH C Ku dish 100cm Fortec dish 90cm Fortec dish 2 DG-240 HH motors Co Rotor II feed horn Norsat 8515 C band lnb Norsat 4506A Ku lnb BSC-621-2 Lnbf Invacom QPH-031 Lnbf Invacom SNH-031 Lnbf Fortec Fsku-v universal Lnbf V-Box |
|
#7
|
||||
|
||||
|
Pictures I promised.
__________________
Rainman's Equipment Undien 4600,DSR 922 Fortec Ultra, Satworks 3618 2 Fortec Mercury II Fortec Classic NA 8.5' Orbitron polar C Ku dish 8.5' Birdview HH C Ku dish 100cm Fortec dish 90cm Fortec dish 2 DG-240 HH motors Co Rotor II feed horn Norsat 8515 C band lnb Norsat 4506A Ku lnb BSC-621-2 Lnbf Invacom QPH-031 Lnbf Invacom SNH-031 Lnbf Fortec Fsku-v universal Lnbf V-Box |
|
#8
|
|||
|
|||
|
I'm not sure if the BSC has polarity marks on it or not. The 741 and 741U do.
The zero mark should be at either 6 or 12 O'clock. |
|
#9
|
||||
|
||||
|
............this is a bsc621-2
__________________
(Pansat-3500, 9200HD, 250sm); Dreambox500; Fortec Dynamic; CW-700, CW-Ultima; PCI-DVB-1027, cnx nano2; 1 Fortec star 1.2 meter dish; 2 motorized WS9036; 2 WS763; SG2100, SG 6000; 10' UNIMESH, 6' solid; DMX241; DMX242; BSC-621; dmx-741u; SNH031; QPH031; Chaparral Quad. Last edited by KRLOS; 07-30-2009 at 01:06 PM. |
|
#10
|
||||
|
||||
|
Quote:
__________________
(Pansat-3500, 9200HD, 250sm); Dreambox500; Fortec Dynamic; CW-700, CW-Ultima; PCI-DVB-1027, cnx nano2; 1 Fortec star 1.2 meter dish; 2 motorized WS9036; 2 WS763; SG2100, SG 6000; 10' UNIMESH, 6' solid; DMX241; DMX242; BSC-621; dmx-741u; SNH031; QPH031; Chaparral Quad. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|