|
|
#1
02-18-2010, 04:42 PM
|
|||
|
|||
Ku band channels in the clear
Hi, I am unable to receive the free KU band channels. I am using a 12ft mesh dish and a motorolla 4Dtv receiver and a Viewsat platinum receiver. Is there some element of programming which I would need to do to start pulling in these free channels?
|
|
#3
02-19-2010, 08:51 AM
|
||||
|
||||
If you have the Viewsat slaved off of the 922 the 922 will need to be on and set to the proper polarity.
__________________
Rainman's Equipment Undien 4600,DSR 922 Fortec Ultra, Satworks 3618 2 Fortec Mercury II Fortec Classic NA 8.5' Orbitron polar C Ku dish 8.5' Birdview HH C Ku dish 100cm Fortec dish 90cm Fortec dish 2 DG-240 HH motors Co Rotor II feed horn Norsat 8515 C band lnb Norsat 4506A Ku lnb BSC-621-2 Lnbf Invacom QPH-031 Lnbf Invacom SNH-031 Lnbf Fortec Fsku-v universal Lnbf V-Box
|
|
#5
02-19-2010, 01:11 PM
|
||||
|
||||
|
you will not be able to get KU with that setup you will need a linear ku lnbf check with robby he sells a nice c ku lnbf the DMX 741.
__________________
Rainman's Equipment Undien 4600,DSR 922 Fortec Ultra, Satworks 3618 2 Fortec Mercury II Fortec Classic NA 8.5' Orbitron polar C Ku dish 8.5' Birdview HH C Ku dish 100cm Fortec dish 90cm Fortec dish 2 DG-240 HH motors Co Rotor II feed horn Norsat 8515 C band lnb Norsat 4506A Ku lnb BSC-621-2 Lnbf Invacom QPH-031 Lnbf Invacom SNH-031 Lnbf Fortec Fsku-v universal Lnbf V-Box
|
|
#7
02-19-2010, 02:56 PM
|
||||
|
||||
|
That's what we are here for friskie2.
__________________
Rainman's Equipment Undien 4600,DSR 922 Fortec Ultra, Satworks 3618 2 Fortec Mercury II Fortec Classic NA 8.5' Orbitron polar C Ku dish 8.5' Birdview HH C Ku dish 100cm Fortec dish 90cm Fortec dish 2 DG-240 HH motors Co Rotor II feed horn Norsat 8515 C band lnb Norsat 4506A Ku lnb BSC-621-2 Lnbf Invacom QPH-031 Lnbf Invacom SNH-031 Lnbf Fortec Fsku-v universal Lnbf V-Box
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
