Need Help With New Omegasat DSB5700 Set Up

[Rainman]

congrats glad to here you got it up and going.

[Babadem]

Originally Posted by REXHICKS

WELL I GOT IT. thanks for all he help. OMG it was the skew on the lnb the whole time. the sugested settings were not even close for my unit. i knew i was on the sat so i lined it up this morning and turn the tv where i could see it and turned the lnbf and presto. settings for my area was 44 degrees . and i read it was clock wise that i should turn it. so i turned it almost upside down and started getting signal and quality. i relalized that it was almost upside down and that water could be a problem so i tried the oposite way and it worked that way also which ment that my settings are counter clockwise about 40 degress. i see some channels have left and read in another post why.

thanks again for your help



WHAT I WAS MISSING ! Skew is clockwise standing behind dish. standing in front would be counter clockwise.

Good to know you finally got it working........ Happy viewing!

[kashefkamari]

I new and I have read all the messages and I tried my best but still I can not get any channels. I have Quality but the channels that scans are all scrambled what should I do? Any suggestion?

I do not have Q signal on Transponder 1-22 for G-19 but when I change it to 21-22 I will get 67% signal so I scanned it but all 280 channels are scrambled. What am I doing wrong?

Thanks all

[Rainman]

are you sure you're on g 19 check some of the transponder freq with lyngsat to make sure you are on the right sat.