|
|
#1
07-30-2009, 07:58 PM
|
|||
|
|||
Galaxy 16 H-3845 weak
Is anyone else having low signal problems with this transponder? It's the network feeds from the Virgin Islands and Puerto Rico. I was getting an acceptable signal up until the last week and a half, and now the signal is low enough that there's no program. I can lock the signal, it's just low. Other frequencies on this bird, both H and V have good readings.
|
|
#2
07-30-2009, 08:59 PM
|
||||
|
||||
|
they are still there with good signal and quality try rescanning them as the SR and pids have changed.
__________________
Rainman's Equipment Undien 4600,DSR 922 Fortec Ultra, Satworks 3618 2 Fortec Mercury II Fortec Classic NA 8.5' Orbitron polar C Ku dish 8.5' Birdview HH C Ku dish 100cm Fortec dish 90cm Fortec dish 2 DG-240 HH motors Co Rotor II feed horn Norsat 8515 C band lnb Norsat 4506A Ku lnb BSC-621-2 Lnbf Invacom QPH-031 Lnbf Invacom SNH-031 Lnbf Fortec Fsku-v universal Lnbf V-Box
|
|
#3
07-31-2009, 12:53 PM
|
|||
|
|||
|
Thanks, Rainman. A blindscan on that bird did the trick. This is the first time I've had to deal with the SR being changed on me. I'll have to check out some other sats where my results don't match Lyngsat's listings.
|
|
#4
07-31-2009, 04:42 PM
|
||||
|
||||
|
yeah they change sr and pids from time to time so when you loose something just do a blind scan and it usually comes back.
__________________
Rainman's Equipment Undien 4600,DSR 922 Fortec Ultra, Satworks 3618 2 Fortec Mercury II Fortec Classic NA 8.5' Orbitron polar C Ku dish 8.5' Birdview HH C Ku dish 100cm Fortec dish 90cm Fortec dish 2 DG-240 HH motors Co Rotor II feed horn Norsat 8515 C band lnb Norsat 4506A Ku lnb BSC-621-2 Lnbf Invacom QPH-031 Lnbf Invacom SNH-031 Lnbf Fortec Fsku-v universal Lnbf V-Box
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
